Honeywell HD45IP User Manual

36
Installing the Honeywell IP Utility and Web Client
Figure 3-2 Honeywell IP Utility User Interface
The Status bar displays how many
devices are on the network, which
one you are connected to, and
which user is logged on.
Connect button
Disconnect button Limited/No connectivity
button
Refresh button
Use the Product Filter drop-down
menu to select a specific device,
such as all HD45IP cameras.
Click Apply to save
manually configured
network settings.
Use Launch Browser
to open the IP web
client for each device.
Use Batch Firmware Upgrade
to select a group of devices and
upgrade the firmware for all.
The About menu displays the
software version installed.
From the User tab, Administrators
can change the web-client user
passwords.
IP Network Setting assigns
network settings automatically
or manually.
Upgrade Firmware
downloaded from the
Honeywell web site.
Enable or disable HTTP
Server.
The Discovery pane lists
the IP devices found on the
network and groups by
device type.

Honeywell HD45IP Specifications

General

Brand	Honeywell
Model	HD45IP
Category	IP Camera
Language	English