Performance Series Indoor Day/Night H.264 IP Camera User Guide
Document 800-09312V2 Rev A 35
08/2012
4. Click the arrow button .
The Honeywell IP Utility program searches for devices on the network and opens to
the Honeywell IP Utility user interface.
5. Automatically discover or manually refresh the list of devices on the network.
Use the manual refresh if a new device was added after you logged onto the system.
• You do not need to do anything to discover devices. When you log on to the IP
Utility, the devices on the network — including the devices on other subnets —
are automatically discovered and listed in the Discovery pane. After the initial
discovery, the network automatically continues to discover devices that are newly
added to the network.
• To manually refresh the device list, click the Refresh button ( ), located near
the top of the Discovery pane.
6. Enable or disable the HTTP Server check box for additional security. Only an
Administrator can disable (uncheck the box), resulting in the user being unable to
access the web client, although video recording is unaffected.
To Next Page
Loading...
Need help?
General