Honeywell HRG4X User Manual

36 | HRG Performance Series DVR User Guide
www.honeywellvideo.com
Shutting Down the HRG DVR
1. Click Menu  ShutDown to enter the Shutdown menu (see Figure 2-1).
Figure 2-1 Shutdown Menu
2. Click ShutDown.
3. Click Yes in the pop-up window to confirm that you want to shut down the HRG DVR.
Rebooting and Locking the HRG DVR
While in the Shutdown menu, you can also reboot or lock your HRG DVR. Locking your HRG
DVR will return you to the Live View mode, which requires a user name and password to exit out
of it. The Reboot button reboots your HRG DVR.
1. Click Menu
 ShutDown to enter the Shutdown menu (see Figure 2-1).
2. Click Lock or Reboot.
Using the Setup Wizard
By default, the Setup Wizard prompt appears when you turn on the HRG DVR (see Figure 2-2).
The Setup Wizard guides you to configure some of the important settings for your HRG DVR.
Note If the check box is cleared , then the Setup Wizard will not run again until the
factory default settings are resumed.
If the check box is selected , then the Setup Wizard will start the next time the
HRG DVR is turned on.

Honeywell HRG4X Specifications

General

Brand	Honeywell
Model	HRG4X
Category	DVR
Language	English