72 | HRG Performance Series DVR User Guide
www.honeywellvideo.com
Figure 7-6 Schedule Settings
Note After you have configured the schedule, the HRG DVR must be restarted for the
new settings to take effect.
11. Select the Handle tab to configure exceptions handling (see Figure 7-7). Exception trigger
options are described in Understanding Exception Trigger Options on page 81.
Figure 7-7 Handle Settings
12. Click OK to save the settings for the selected camera.
You can now add a schedule to start recording when motion is detected (see Scheduling
Recording on page 41).
Sensor Alarm Settings
Recordings can be triggered from an external relay alarm device.
To set up sensor alarms:
To Next Page
Loading...
Need help?
General