78 | HRG Performance Series DVR User Guide
www.honeywellvideo.com
Figure 7-17 Handle Settings
8. Click OK to save the settings.
9. Repeat step 3 to step 8 to configure settings for other channels.
Video Tampering Detection
The video tampering can also be detected and set to trigger an action on your DVR.
Note The video tampering detection area is in full-screen mode by default and cannot
be configured.
To set up video tampering detection:
1. Click Menu
Settings Camera to enter the Camera Settings menu (see Figure 7-18).
Figure 7-18 Camera Settings Menu
To Next Page
Loading...
