800-13897 - A - 01/2013
Alarm Settings | 75
Figure 7-12 Alarm Output Settings
3. Configure the settings for the selected output.
4. Click OK to save the settings.
Note If Hold For is set as Manually Stop, the alarm will only stop when you manually
turn it off (see Manual Alarm Triggering).
Manual Alarm Triggering
You can trigger alarm outputs manually through the Manual Alarm menu.
To trigger alarm outputs manually:
1. Click Menu
Manual Alarm to enter the Manual Alarm menu (see Figure 7-13).
Figure 7-13 Manual Alarm Menu
To Next Page
Loading...
Need help?
General