800-13897 - A - 01/2013
Camera Management | 99
Privacy Mask Settings
You can set up privacy mask to mask off sensitive or private areas in the field of view of a
camera.
To set up a privacy mask:
1. Click Menu
Settings Camera to enter the Camera Settings menu.
2. Select the Advanced tab to enter the Advanced Camera Settings menu (see Figure 10-4).
Select the channel for privacy mask settings in the Camera drop-down list.
Figure 10-4 Advanced Camera Settings Menu
3. Select the Mask check box to enable the feature.
4. Click Area Settings to enter the Area Settings menu.
5. Set the mask area (see Figure 10-5). You can configure up to four areas.
Figure 10-5 Setting Mask Area
6. Click Exit to save the settings and exit the Mask Area Settings interface.
To Next Page
Loading...
Need help?
General