800-13897 - A - 01/2013
9
PTZ Control 9
This chapter describes how to configure and use the HRG Performance Series DVR to control
PTZ Dome cameras in your network system.
Navigating the PTZ Menu
PTZ menus can be navigated using either the mouse or the front panel/remote. For quick
access to certain PTZ settings, click the right mouse button in Live View mode, and then click
PTZ to enter PTZ control mode (see Using the Mouse in Live View on page 34). While in PTZ
control mode, right-click anywhere in the window to see the PTZ menu (see Figure 9-1).
Figure 9-1 PTZ Menu
To Next Page
Loading...
