94 | HRG Performance Series DVR User Guide
www.honeywellvideo.com
Figure 9-4 Preset Management Menu
Note Only valid presets can be called and deleted.
Customizing Patrols
Patrols can be programmed to move the PTZ to different key points and make it stay there for a
defined duration before moving on to the next point. The key points are defined by presets
which can be set by following the steps above in Customizing Presets.
To set up and call PTZ patrols:
1. Open the PTZ Control panel (Figure 9-3), by clicking PTZ in the mouse menu or by
pressing PTZ on the front panel of the DVR.
2. Click Patrol to enter the Patrol Management menu (see Figure 9-5).
Figure 9-5 Patrol Management Menu
To Next Page
Loading...
