Honeywell ST 800 Series - Device Information Configuration; Table 4 - Device Information Parameters

Page 14 ST 800 Series HART/DE Option User’s Manual Revision 5.0
Device Information Configuration
In this and subsequent procedures, the notations R for read only and R/W for read/write are used to
indicate if a parameter can be edited.
1. On the DE MAIN MENU, select Device Info. The DEVICE INFO box will be displayed.
2. Configure device information according to Table 4.
Table 4 – Device Information Parameters
Parameter
Read (R) or
Read/Write (R/W)
Configuration Details
Tag ID
R/W
User ID up to 8 alphanumeric characters.
Type
R
Manufacturer’s device type identifier
Firmware Version
R
Manufacturer’s firmware version identifier
PROM ID Number
R
PROM ID Number
Scratch Pad
R/W
Up to 32 alphanumeric characters
3. Select the Back button to go back to the DE MAIN MENU.