Honeywell ST 800 Series - General Configuration Parameters; Table 5 - General Configuration Parameters

Revision 5.0 ST 800 Series HART/DE Option User’s Manual Page 15
General Configuration Parameters
Select the General button on the DEVICE MAIN MENU page, and configure parameters
according to
Table 5.
Table 5 – General Configuration Parameters
Parameter
Read (R) or
Read/Write (R/W)
Configuration Details
PV Type
R/W
Dual Range Smart Transmitter Digital Communications
(STDC) or Single Range or Single Range with
secondary variable (SV).
Communication
Mode
R/W
Analog, DE 4-byte, or DE 6-byte
FS Direction
R
Failsafe (FS) direction: upscale or downscale, switch
selectable on the electronics module. See the ST 800
SmartLine Transmitter User Manual for details.
Select the Back button to go back to the DE MAIN MENU.