Page 54 ST 800 Series HART/DE Option User’s Manual Revision 5.0
Deleting offline configuration
Using this feature you can delete an offline configuration template.
To delete an offline configuration, perform the following steps.
12. On the FDC homepage, tap Offline Configuration > Select.
The Offline Configurations page appears.
13. Select the required offline configuration template from the list.
14. Tap Options > Delete. A warning message appears.
15. Tap Yes to delete the offline configuration template.
Downloading an offline configuration
Using this feature, you can download the offline configuration when the device is online.
To download an offline configuration, perform the following steps.
16. On the FDC homepage, tap Offline Configuration > Select.
The Offline Configurations page appears.
17. Select the required offline configuration template from the list.
18. Tap Options > Download.
The Offline – Select Variables page appears with the all the variables.
Note: By default, all the variables selected in FDM will appear as selected and non-editable
variables appear in grey color.
19. Select the required variable. In case you select a dependent variable, then variables on which it
is dependent on will also be selected and the following warning appears.
20. Tap OK to return to the offline wizard.
21. Tap Next.
The Offline – Review and Send page appears with the list of selected variables.
22. Tap Send and the process to send the variables to the device starts. Once the downloading is
complete, the following page appears.
To Next Page
Loading...
