Honeywell ST 800 Series User Manual

Revision 5.0 ST 800 Series HART/DE Option User’s Manual Page 69
4. If corrects should not be overwritten with factory values, select No. If corrects need to be
overwritten, select Yes. The timer will appear briefly, indicating the operation is performed
This function commands the transmitter to overwrite all user input corrections with
factory default ("characterization") values. It is intended for use only when excessive
corrections render the transmitter inaccurate. It is highly recommended that input calibration
procedure be performed after calibration reset.

Honeywell ST 800 Series Specifications

General

Brand	Honeywell
Model	ST 800 Series
Category	Transmitter
Language	English