Honeywell Xenon Series User Manual

Xenon/Granit User Guide 287
Preferred Symbology On PRFENA1 137
*Off PRFENA0 137
High Priority Symbology PRFCOD## 137
Low Priority Symbology PRFBLK## 137
Preferred Symbology Timeout
(*500) Range 100-3000
PRFPTO#### 138
Preferred Symbology Default PRFDFT 138
Output Sequence Editor Enter Output Sequence SEQBLK 139
Add Prefix to Complete Output
Sequences
SEQPRE 139
Add Suffix to Complete Output
Sequences
SEQSUF 139
Add Separators to Complete
Output Sequences
SEQSEP 139
Terminate String FF 139
Partial Sequence Transmit Partial Output Sequence SEQTTS1 139
Add Prefix to Partial Output
Sequences
SEQIPR 139
Add Suffix to Partial Output
Sequences
SEQISU 139
Add Separators to Partial Output
Sequences
SEQISE 139
Terminate String FF 139
*Discard Partial Output Sequence SEQTTS0 144
Default Output Sequence SEQDFT 144
Require Output Sequence Required SEQ_EN2 145
On/Not Required SEQ_EN1 145
*Off SEQ_EN0 145
Good Read Tone - Output
Sequences
Good Read Beep - Each Code in
Sequence
BEPSIN0 145
*Good Read Click - Each Code in
Sequence
BEPSIN1 145
Good Read Beep - Partial
Sequence Output
BEPISE0 145
*Error Tone - Partial Sequence
Output
BEPISE1 145
Multiple Symbols On SHOTGN1 145
*Off SHOTGN0 145
No Read On SHWNRD1 146
*Off SHWNRD0 146
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page

Honeywell Xenon Series Specifications

General

IP Rating	IP42
Connectivity	USB, RS-232, Keyboard Wedge, IBM 46XX, Synapse, USB-CDC
Decode Capabilities	1D and 2D barcodes
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Light Levels	Ambient light up to 100, 000 lux
Field of View	Horizontal: 41.4°; Vertical: 32.2°
Interface	USB, RS-232, Keyboard Wedge, IBM 46XX
Humidity	5% to 95% (non-condensing)
Dimensions	104 mm x 71 mm x 160 mm (4.1 in x 2.8 in x 6.3 in)
Drop Resistance	Withstands 50 drops at 1.8 m (6 ft) to concrete
Drop Specification	Withstands 50 drops at 1.8 m (6 ft) to concrete