153
portal server and make sure the product of interval and retry is greater than or equal to the portal user
heartbeat interval. HP recommends that you configure the interval to be greater than the portal user
heartbeat interval configured on the portal server.
For redundant user information on the device (information for users who are considered nonexistent on
the portal server), the device deletes the information during the (N+1)th interval, where N is equal to the
value of retries configured in the portal server user-sync command.
Logging off portal users
Logging off a user terminates the authentication process for the user or removes the user from the
authenticated users list.
To log off users:
Ste
Command
1. Enter system view.
system-view
2. Log off users.
portal delete-user { ipv4-address | all | interface
interface-type interface-number | ipv6 ipv6-address }
Displaying and maintaining portal
Task Command Remarks
Display the ACLs on an interface.
display portal acl { all | dynamic |
static } interface interface-type
interface-number [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display portal connection statistics
on a specific interface or all
interfaces.
display portal connection statistics
{ all | interface interface-type
interface-number } [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display information about a
portal-free rule or all portal-free
rules.
display portal free-rule
[ rule-number ] [ | { begin | exclude
| include } regular-expression ]
Available in any view
Display the portal configuration of
an interface.
display portal interface
interface-type interface-number [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display configuration information
about the local portal server.
display portal local-server [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display information about a
specific portal server or all portal
servers.
display portal server
[ server-name ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view