15
No. Sub-attribute Descri
tion
203 Input-Interval-Packets Packets input within an accounting interval, in the unit set on the device.
204 Output-Interval-Packets Packets output within an accounting interval, in the unit set on the device.
205 Input-Interval-Gigawords Result of bytes input within an accounting interval divided by 4G bytes.
206 Output-Interval-Gigawords Result of bytes output within an accounting interval divided by 4G bytes.
207 Backup-NAS-IP Backup source IP address for sending RADIUS packets.
255 Product_ID Product name.
FIPS compliance
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode (see "Configuring FIPS") and non
-FIPS mode.
AAA configuration considerations and task list
To configure AAA, you must complete these tasks on the NAS:
1. Configure the required AAA schemes.
{ Local authentication—Configure local users and the related attributes, including the usernames
and passwords of the users to be authenticated.
{ Remote authentication—Configure the required RADIUS and HWTACACS schemes. You must
configure user attributes on the servers accordingly.
2. Configure AAA methods for the users' ISP domains.
{ Authentication method—No authentication (none), local authentication (local), or remote
authentication (scheme)
{ Authorization method—No authorization (none), local authorization (local), or remote
authorization (scheme)
{ Accounting method—No accounting (none), local accounting (local), or remote accounting
(scheme)
To Next Page
Loading...
Need help?
General