21
Step Command Remarks
3. Configure password control
attributes for the user group.
• Set the password aging time:
password-control aging
aging-time
• Set the minimum password
length:
password-control length length
• Configure the password
composition policy:
password-control composition
type-number type-number
[ type-length type-length ]
Optional.
By default, the user group uses
global password control attribute
settings.
For more information about
password control attributes
configuration commands, see
Security Command Reference.
4. Configure the authorization
attributes for the user group.
authorization-attribute { acl
acl-number | idle-cut minute | level
level | user-profile profile-name |
vlan vlan-id | work-directory
directory-name } *
Optional.
By default, no authorization
attribute is configured for a user
group.
5. Set the guest attribute for the
user group.
group-attribute allow-guest
Optional.
By default, the guest attribute is not
set for a user group, and guest
users created by a guest manager
through the Web interface cannot
join the group.
Displaying and maintaining local users and local user groups
Task Command Remarks
Display local user information
display local-user [ idle-cut { disable |
enable } | service-type { ftp |
lan-access | portal | ssh | telnet |
terminal | web } | state { active |
block } | user-name user-name | vlan
vlan-id ] [ slot slot-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display the user group configuration
information.
display user-group [ group-name ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Configuring RADIUS schemes
A RADIUS scheme specifies the RADIUS servers that the switch can cooperate with and defines a set of
parameters that the switch uses to exchange information with the RADIUS servers. There may be
authentication/authorization servers and accounting servers, or primary servers and secondary servers.
The parameters include the IP addresses of the servers, the shared keys, and the RADIUS server type.
RADIUS scheme configuration task list