HP 3600 v2 Series Configuration Guide

228
Setting user group password control parameters
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a user group and enter
user group view.
user-group group-name N/A
3. Configure the password
aging time for the user group.
password-control aging aging-time
Optional
By default, the aging time of the
user group is the same as the
global password aging time.
4. Configure the minimum
password length for the user
group.
password-control length length
Optional
By default, the minimum password
length of the user group is the same
as the global minimum password
length.
5. Configure the password
composition policy for the
user group.
password-control composition
type-number type-number
[ type-length type-length ]
Optional
By default, the password
composition policy of the user
group is the same as the global
password composition policy.
Setting local user password control parameters
Ste
p
Command Remarks
1. Enter system view. system-view N/A
2. Create a local user and enter
local user view.
local-user user-name N/A
3. Configure the password
aging time for the local user.
password-control aging aging-time
Optional
By default, the setting equals that
for the user group to which the
local user belongs. If no aging time
is configured for the user group,
the global setting applies to the
local user.
4. Configure the minimum
password length for the local
user.
password-control length length
Optional
By default, the setting equals that
for the user group to which the
local user belongs. If no minimum
password length is configured for
the user group, the global setting
applies to the local user.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English