HP 3600 v2 Series

314
Ste
p
Command Remarks
1. Enter system view. system-view N/A
2. Enable the switch to support
first-time authentication.
ssh client first-time [ enable ]
Optional.
By default, first-time authentication
is supported on a client.
Disabling first-time authentication
For successful authentication of an SSH client not supporting first-time authentication, the server host
public key must be configured on the client and the public key name must be specified.
To disable first-time authentication:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Disable first-time
authentication support.
undo ssh client first-time
By default, first-time authentication
is supported on a client.
3. Configure the server host
public key.
See "Configuring a client's host
public key"
The method for configuring the
server host public key on the client
is similar to that for configuring
client public key on the server.
4. Specify the host public key
name of the server.
ssh client authentication server
server assign publickey keyname
N/A
Establishing a connection between the SSH client and server