EasyManua.ls Logo

HP 3600 v2 Series

HP 3600 v2 Series
449 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
184
[Switch-radius-rs1] primary accounting 1.1.1.2
[Switch-radius-rs1] key accounting simple radius
[Switch-radius-rs1] key authentication simple radius
[Switch-radius-rs1] quit
3. Configure an authentication domain:
# Create and enter ISP domain triple.
[Switch] domain triple
# Configure AAA methods for the ISP domain.
[Switch-isp-triple] authentication portal radius-scheme rs1
[Switch-isp-triple] authorization portal radius-scheme rs1
[Switch-isp-triple] accounting portal radius-scheme rs1
[Switch-isp-triple] quit
# Configure domain triple as the default ISP domain for all users. Then, if a user enters a username
without any ISP domain at logon, the authentication and accounting methods of the default
domain are used for the user.
[Switch] domain default enable triple
4. Configure the DHCP relay agent:
# Enable DHCP.
[Switch] dhcp enable
# Create DHCP server group 1 and add DHCP server 1.1.1.3 into the group.
[Switch] dhcp relay server-group 1 ip 1.1.1.3
# Enable the DHCP relay agent on VLAN-interface 8.
[Switch] interface vlan-interface 8
[Switch-Vlan-interface8] dhcp select relay
# Correlate DHCP server group 1 with VLAN-interface 8.
[Switch-Vlan-interface8] dhcp relay server-select 1
[Switch-Vlan-interface8] quit
# Enable the DHCP relay agent on VLAN-interface 2.
[Switch] interface vlan-interface 2
[Switch-Vlan-interface2] dhcp select relay
# Correlate DHCP server group 1 with VLAN-interface 2.
[Switch-Vlan-interface2] dhcp relay server-select 1
[Switch-Vlan-interface2] quit
# Enable the DHCP relay agent on VLAN-interface 3.
[Switch] interface vlan-interface 3
[Switch-Vlan-interface3] dhcp select relay
# Correlate DHCP server group 1 with VLAN-interface 3.
[Switch-Vlan-interface3] dhcp relay server-select 1
[Switch-Vlan-interface3] quit
Verifying the configuration
Before user userpt accesses a Web page, the user is in VLAN 8 (the initial VLAN), and is assigned with
an IP address on subnet 192.168.1.0/24. When the user accesses a Web page on the external network,
the Web request will be redirected to authentication page https://4.4.4.4/portal/logon.htm. After
entering the correct username and password, the user can pass the authentication. Then, the device will

Table of Contents

Other manuals for HP 3600 v2 Series

Related product manuals