EasyManuals Logo

HP 3600 v2 Series Configuration Guide

HP 3600 v2 Series
449 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #206 background imageLoading...
Page #206 background image
193
4. Configure DHCP:
# Configure VLANs and IP addresses for the VLAN interfaces, and add ports to specific VLANs.
(Details not shown.)
# Enable DHCP.
<Switch> system-view
[Switch] dhcp enable
# Exclude the IP address of the update server from assignment.
[Switch] dhcp server forbidden-ip 2.2.2.2
# Configure IP address pool 1, including the address range, lease and gateway address. A short
lease is recommended to shorten the time terminals use to re-acquire IP addresses after the
terminals passing or failing authentication.
[Switch] dhcp server ip-pool 1
[Switch-dhcp-pool-1] network 192.168.1.0 mask 255.255.255.0
[Switch-dhcp-pool-1] expired day 0 hour 0 minute 1
[Switch-dhcp-pool-1] gateway-list 192.168.1.1
[Switch-dhcp-pool-1] quit
A short lease is recommended to shorten the time that terminals use to re-acquire IP addresses after
passing or failing authentication. However, in some applications, a terminal can require a new IP
address before the lease duration expires. For example, the iNode 802.1X client automatically
renews its IP address after disconnecting from the server.
# Configure IP address pool 2, including the address range, lease and gateway address. A short
lease is recommended to shorten the time terminals use to re-acquire IP addresses after the
terminals pass authentication.
[Switch] dhcp server ip-pool 2
[Switch-dhcp-pool-2] network 2.2.2.0 mask 255.255.255.0
[Switch-dhcp-pool-2] expired day 0 hour 0 minute 1
[Switch-dhcp-pool-2] gateway-list 2.2.2.1
[Switch-dhcp-pool-2] quit
# Configure IP address pool 3, including the address range, lease and gateway address. A short
lease is recommended to shorten the time terminals use to re-acquire IP addresses after the
terminals are offline.
[Switch] dhcp server ip-pool 3
[Switch-dhcp-pool-3] network 3.3.3.0 mask 255.255.255.0
[Switch-dhcp-pool-3] expired day 0 hour 0 minute 1
[Switch-dhcp-pool-3] gateway-list 3.3.3.1
[Switch-dhcp-pool-3] quit
# Configure IP address pool 4, and bind the printer MAC address 0015-e9a6-7cfe to the IP
address 3.3.3.111/24 in this address pool.
[Switch] dhcp server ip-pool 4
[Switch-dhcp-pool-4] static-bind ip-address 3.3.3.111 mask 255.255.255.0
[Switch-dhcp-pool-4] static-bind mac-address 0015-e9a6-7cfe
[Switch-dhcp-pool-4] quit
5. Configure portal authentication:
# Create SSL server policy sslsvr and specify it to use PKI domain pkidm.
[Switch] ssl server-policy sslsvr
[Switch-ssl-server-policy-sslsvr] pki pkidm
[Switch-ssl-server-policy-sslsvr] quit

Table of Contents

Other manuals for HP 3600 v2 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 3600 v2 Series and is the answer not in the manual?

HP 3600 v2 Series Specifications

General IconGeneral
BrandHP
Model3600 v2 Series
CategorySwitch
LanguageEnglish

Related product manuals