HP 5920 Series Fc And Fcoe Configuration Guide

22
Figure 16 Incorrect FC link aggregation networks
FC link aggregation configuration task list
Tasks at a
g
lance
(Required.) Configuring an FC aggregate interface
(Required.) Assigning an FC interface to an FC aggregation group
(Optional.) Enabling local-first load sharing
Configuring an FC aggregate interface
After you create an FC aggregate interface, the system automatically creates an FC aggregation group
numbered the same.
To configure an FC aggregate interface:
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A
2. Create an FC
aggregate interface (if
the specified interface
does not exist) and
enter its view.
interface san-aggregate
interface-number
N/A

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English