HP 5920 Series Fc And Fcoe Configuration Guide

31
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure an FKA
advertisement interval
value.
fcoe fka-adv-period
fka-adv-period
The default setting is 8 seconds.
Configuring the FCF priority
The FCF priority includes the system FCF priority and the VFC interface FCF priority.
• System FCF priority—The system FCF priority is used in the fcf priority field in a solicited Discovery
Advertisement.
• VFC interface FCF priority—The VFC interface FCF priority is used in the fcf priority field in an
unsolicited Discovery Advertisement.
An ENode selects the FCF switch with the highest priority from the FCF switches sending Discovery
Advertisements and sends a FLOGI request to the FCF switch for login.
The FCF priority takes effect only on a VFC interface connected to an ENode (VFC interface operating
in F mode).
Configuring the system FCF priority
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the system
FCF priority.
fcoe global fcf-priority
priority
The default setting is 128.
The configuration takes effect on all VFC
interfaces operating in F mode.
Configuring the VFC interface FCF priority
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VFC interface
view.
interface vfc
interface-number
N/A
3. Configure the FCF
priority for the VFC
interface.
fcoe fcf-priority priority
The default setting is 128.
The configuration takes effect only on a VFC
interface operating in F mode.
Displaying and maintaining FCoE
Execute display commands in any view.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English