27
# Display detailed information for FC aggregation group 1 on Switch A.
[SwitchA] display san-aggregation verbose interface san-aggregation 1
Interface SAN-Aggregation1:
State : UP
Mode : E
Speed : 8Gbps
Member port number : 2
Selected port number : 2
Member port State Mode Speed Selected
Fc1/0/1 UP E 4Gbps Y
Fc1/0/2 UP E 4Gbps Y
The output shows that:
• FC 1/0/1 and FC 1/0/2 are Selected and can perform load sharing.
• The speed of the FC aggregate interface is 8 Gbps, which is the sum of the speed of each Selected
FC interface.
• When an FC interface fails, the traffic can be transmitted over the other FC interface, which
improves the link reliability.
To Next Page
Loading...
Need help?
General
