FINAL TRIM SIZE : 7.0 in x 8.5 in
7
Table 7-1. Hardware-Error LED Indications (continued)
Self-Test LED
Error Display
Hex
Co de
Possible
Assembly Replacement Priority
AB 1. EISA converter b oard.
2. Mother b oard.
3. System b oard.
AC 1. VME card cage or con
verter b oard.
2. Mother b oard.
3. System b oard.
B1 1. EEPROM.
2. System b oard.
B5 System board.
B6 1. RAM b oards.
2. System b oard.
B9 1. EEPROM.
2. System b oard.
E1 System b oard.
E2 1. Set RTC clo ckorcheck battery.
2. System b oard.
E3 1. RS-232A cable or device.
2. System b oard.
E4 1. RS-232B cable or device.
2. System b oard.
E5 1. SCSI cable or device.
2. System b oard.
E6. 1. LAN cable or server.
2. System b oard.
E7 1. Graphics switch settings.
2. System b oard.
E8 1. SGC card. If SGC not installed, ignore.
2. Mother b oard.
3. System b oard.
DRAFT
2/5/97 11:31
Dealing With Problems 7-5
To Next Page
Loading...
