FINAL TRIM SIZE : 7.0 in x 8.5 in
5
5. In the next screen, c
hoose the line iden
tifying the mo del of the new disk.
If the device you have connected do es not appear on the list:
a. Checkyour hardware connections, and make sure that the device is
turned
on
.
b. Click on the button
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Device Missing
, and you will b e giv
en the
following options:
i. Have SAM rescan the system for the device. If y
ou have connected
the device
after
starting SAM, you should clickon
NNNNNNNNNNN
Yes
. Otherwise,
clickon
NNNNNNNN
No
.
ii. Respond to the conrmation screen regarding whether the device is
connected and powered up.
iii. Respond to the conrmation screen regarding whether additional
device drivers are needed. (Unless the kernel has, for some reason,
had drivers removed, the drivers needed for a hard disk should
currently be in the kernel.)
iv. You will b e given an information screen suggesting things to try if
the device still cannot be found. If this is the case, y
ou will need to
consult
Instal ling Peripherals
.
6. After you choose the device, you will see a form giving three tasks:
a.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Select a Disk to Add
.(You have already done this).
b.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Set Disk Usage and Options
.
c.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Modify Defaults...
. (This task is optional).
Cho ose
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Set Disk Usage and Options
.
7. On the form which app ears, select howyou want to use the disk (\File
System", or other usage).
8.
Clickon
NNNNNNNN
OK
when you have nished with this form.
9. A \Messages" Box app ears, rep orting the progress of the task. When the
task is nished, clickon
4
OK
5
.
5-12 Configuring HP-UX for Printers and Drives DRAFT
2/5/97 11:31
To Next Page
Loading...
Need help?
General
