HP BladeSystem c-Class Troubleshoot Manual

HP BladeSystem Insight Display troubleshooting 23
Step HP BladeSystem c7000 Enclosure Insight Display action and verification
Verification
Wait for up to 2 minutes, and then check the Insight Display.
•
If the issue still exists, then continue to the next step.
•
If the Insight Display illuminates and the Insight Display buttons operate, then complete
the repair by replacing the original OA tray.
To replace the OA tray:
1 Install the metal cover.
2 Install the devices in the original device bays.
3 Remove OA #X from OA bay X.
4 Remove the spare OA tray.
5 Install the original OA tray.
6 Install OA #X in OA bay X.
7 Install OA #Y, if present.
Step 13
Contact an authorized service provider to complete the midplane assembly replacement
(on page 66).

HP BladeSystem c-Class Specifications

General

Brand	HP
Model	BladeSystem c-Class
Category	Enclosure
Language	English