8VLQJ6KRFN$GYLVRU\0RGH2SWLRQDO
Using Shock Advisory Mode
4-8
The unit will deliver defibrillator energy levels to a set of multifunction
defib electrodes even if they are not attached to a patient. The message
PADS OFF appears when there are no electrodes or there is poor
electrodes-to-patient contact. Check all patient connections if one these
messages appears.
1 Attach the electrode adapter cable (M2472A) to the paddle connector on the
front of the defibrillator.
2 Slide the paddle connector lock towards the front of the defibrillator to secure
the cable. See Figure 4-2.