HP Codemaster 100 - Changing the Layout and Content of the Printed Reports; The ECG Report

8VLQJWKH/HDG2SWLRQ
Setting Up the Printed Report
6-21
Changing the Layout and Content of the Printed Reports
The default format is set through the Configuration Menu. You can change the
format and size (gain) through the ECG main screen. To change the report lead
format:
1
Press Stop.
2 Use the F2 softkey to toggle through the available formats. Press F4 to
change the size.
The ECG Report
Figure 6-4 shows a sample report with all the fields identified in Table 6-5.
Note that some fields must be selected in order to properly interpret/analyze
the acquired ECG. Figure 6-4 illustrates a two page report.