HP Codemaster 100 - Setup Transmission

6HWXSDQG&RQILJXUDWLRQ
Configuring the 12-Lead Option
2-24
Setup Transmission
This menu allows the configuration of both the internal and an external modem.
Note that your CodeMaster 100 with the 12-Lead option is pre-configured using
Hayes™-compatible settings. Hewlett-Packard recommends that you not change
any default settings if you are using the internal modem or a Hayes-compatible
external modem.
You must select the correct country to ensure compliance with telecom regulatory
standards.
Modem initialization string is used for modem initialization commands only and
should not contain dialing information. Fax initialization string is used for fax
initialization commands only and should not contain dialing information. Cellular
initialization string is used for cellular initialization commands only and should not
contain dialing information.
NOTE
Setup Transmission
Country: USA/Canada (This field will only appear if
an internal modem is present)
Modem Initialization String:
AT &F M0 E0 &C1 &D2 S0=0 &S0 &M0 &W
AT %E0
Fax Initialization String:
AT &F M0 E0 &C1 &D2 &S0 +FCLASS=1
Cellular Initialization String:
AT &F M0 E0 &C1 &D2 S0=0 &S0 &M0 &W
AT
Cellular dialing prefix:
Erase Exit
F1 F2 F3 F4 F5