HP Codemaster 100 - Loading the Recorder Paper; Connecting the Paddles or Multifunction Defib Electrodes and Patient Cables

6HWXSDQG&RQILJXUDWLRQ
Setting Up the CodeMaster 100
2-3
If the battery is not properly seated in the battery compartment of the CodeMaster
100, the instrument will display the warning message
CHECK BATTERY
accompanied by an audible warning when you power on the instrument.
Loading the Recorder Paper
The HP CodeMaster 100 recorder uses 50mm wide, thermal recorder paper (HP
40457C/D). To load the paper, refer to “Changing the Recorder Paper” on page
13-7.
Connecting the Paddles or Multifunction Defib Electrodes and
Patient Cables
The defibrillator has a paddles/electrode adapter cable for attaching external
paddles, internal paddles, or multifunction defib electrodes. It also has an ECG Input
connector for attaching ECG leads.
NOTE