HP Codemaster 100 - Post Shock Data; Printing the Event Summary Record

0RQLWRULQJ
Recording
5-12
Post Shock Data
As described in Table 2-2 on page 2-12, you can enable or disable the
recording of post shock statistics.
•If Post Shock Data is enabled, the defibrillator will record the shock deliv-
ery statistics (Actual Delivered Energy, Patient Impedance, Peak Current).
•If Post Shock Data is disabled, the defibrillator will record the energy to
which it was charged as the delivered energy. For example, if the unit was
charged to 200J, the delivered energy annotation on the ECG strip would be
DEL 200J.
Printing the Event Summary Record
During defibrillator usage, the monitor stores up to 28 ECG strips of critical
information called events. Events include all shocks, heart rate alarm
violations, SpO
2
alarm violations, and mark events. Each event record
includes date of event, heart rate, SpO
2
reading, ECG source, and size setting
as shown in Table 5-7. The time annotated on the ECG strip is within 8
seconds of the recorded event. The message "ES" is printed at the top of the
ECG strip when you print the Event Summary record.
•To print the Event Summary on the recorder, press Review. The recorder
must not be printing to print an Event Summary with this key.
•To stop printing the Event Summary, press Review or Record.
•To review the Event Summary later, turn the unit on and press Review.
Table 5-7 Event Summary Record Information
Event Event Summary Description
6KRFN 6KRFN'HOLYHUHGHQHUJ\SHDNFXUUHQWDQGSDWLHQWLPSHGDQFH
+HDUW5DWH$ODUPVYLRODWLRQ +HDUW5DWHDODUPOLPLWV
6S2

$ODUPVYLRODWLRQ 6S2

DODUPOLPLWV
Mark 0DUNHUV\PERO DQQRWDWHVVWULSDWSRLQW Mark ZDVSUHVVHG