HP Codemaster 100 - Page 199

7UDQVPLWWLQJ'DWDIURPWKH/HDG2SWLRQ
Transmitting a 12-Lead ECG
10-11
3 Choose the transmission destination for the ECG from the phone directory using
the arrow keys. Use the F4 key to move through the different directory pages.
4 Press F2 or Send to transmit the ECG.
5 The system displays a message indicating successful transmission and then
returns to the home display. If the ECG does not transmit, the system displays
the Send ECGs screen.
If the system does not transmit the ECG successfully, refer to the section “Iden-
tifying Transmission Problems” on page 12-17.
Press the STOP key to halt the transmission process.
For configuration information, refer to Chapter 2, ”Setup and Configuration”.
NOTE