46 Chapter 4 General procedures ENWW
Transferring the ink definition file to the press
All HP Indigo presses except for Indigo Sun
computer-based presses
1 (On the press) From the Options menu, click Ink List. The Ink List window appears.
2 Click Import. The Import ink definition window appears.
3 Select the network directory in which you saved the ink definition file on the IMS
computer.
If you saved the ink definition file to a disk and you want to load the file from that disk,
insert the disk into the press computer, and in this step select 3¾ Floppy (A:).
Note To see only the ink definition files, select On-Site Mixing (*.osm) in the Files of type field.
4 Select the ink definition file. The file must have the .osm extension.
5 Click Open.
6 Click Close.
Indigo Sun computer-based presses
1 Login (User Mode) as Supervisor to access the necessary options.
2 From the Config menu, click Colors Data Base. The Colors Data Base window
appears.
3 Click OnSite DB.
4 Click Read.
Note If the ink name that you sent from the IMS software already exists in any of the databases on
the press, the software automatically appends a number (1, 2, 3, and so on) to the ink name.
5 Select the ink definition file from the OnSite DB list, and click Add to Local Colors
DB. The selected file is added to the Local Colors DB list.
6 Click Quit to close the Color Data Base window.
To Next Page
Loading...