ENWW Preparing the basic inks 47
Preparing the basic inks
1 Look at the Ingredients list to see which basic inks are needed for the target color
that you want to print.
Ingredients list
2 Place at least one can of each basic ink into the shaker. There should be no more
than four cans in the shaker.
Note The only cans that need shaking are those that have not been shaken in the past 24 hours.
Note If a basic ink can has been used previously, some imaging oil may spill out of the can during
shaking. To prevent this, wipe the bottom of the can with a tissue and cover the hole at the
bottom of the can with adhesive tape.
3 Operate the shaker to ensure that each basic ink is of uniform concentration.
See “Shaking the can” on page 51 for a detailed description of how to operate the
shaker.
To Next Page
Loading...