ENWW Shaking the can 51
Crimper
5 Seal the can by pulling the crimper lever down as far as possible.
6 Raise the crimper lever, and remove the can.
Shaking the can
Shaker with safety cover open
To use the shaker, perform the following steps:
1 Open the safety cover.
2 To allow easy insertion of cans into the shaker, manually rotate the shaker plates until
they are horizontal.
3 Rotate the plate adjusting handle counterclockwise to raise the upper plate.
4 Place an adapter ring on the valve side of the can, and insert the can into the shaker
with the valve facing up.
Note You may insert up to four cans in the shaker. Position the cans in the central area of the shaker
plates.
Lever
Ink can
Crimper
Safety
cover
Timer
knob
Plate
adjusting
handle
Upper
plate
Shaker
plates
To Next Page
Loading...