HP ProCurve 2910al Switch User Manual

Getting Started
Sources for More Information
• port configuration, trunking, traffic control, and PoE operation
• SNMP, LLDP, and other network management topics
• file transfers, switch monitoring, troubleshooting, and MAC address
management
■ Advanced Traffic Management Guide—Use this guide for information on
topics such as:
• VLANs: Static port-based and protocol VLANs, and dynamic GVRP
VLANs
• spanning-Tree: 802.1D (STP), 802.1w (RSTP), and 802.1s (MSTP)
• Quality-of-Service (QoS)
• Access Control Lists (ACLs)
■ Multicast and Routing Guide—Use this guide for information on topics
such as:
• IGMP
• IP routing
■ Access Security Guide—Use this guide for information on topics such as:
• Local username and password security
• Web-Based and MAC-based authentication
• RADIUS and TACACS+ authentication
• SSH (Secure Shell) and SSL (Secure Socket Layer) operation
• 802.1X access control
• Port security operation with MAC-based control
• Authorized IP Manager security
• Key Management System (KMS)
■ IPv6 Configuration Guide—Use this guide for information on topics
such as:
• Overview of IPv6 operation and features
• Configuring IPv6 addressing
• Using IPv6 management, security, and troubleshooting features
1-5

HP ProCurve 2910al Switch Specifications

General

Model	HP ProCurve 2910al Switch
Layer	Layer 3
Jumbo Frame Support	Yes
Power Device	Internal power supply
VLAN Support	Yes
Power Supply	100-240 VAC, 50/60 Hz
Ports	24 or 48 x 10/100/1000 ports
Uplink Ports	4 x SFP (mini-GBIC)
Stacking	Yes
MAC Address Table Size	32000 entries
Routing Protocol	RIP, OSPF, BGP, IGMP
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP
Features	VLAN, QoS, IPv6, ACLs
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af
Operating Temperature	0 to 45°C
Operating Humidity	15% to 95% (noncondensing)
Power over Ethernet (PoE)	PoE+ (802.3at) on PoE+ models, PoE (802.3af) on PoE models