Manually deploy an OS:
a. Insert the installation media.
For remote management, click Virtual Drives in the iLO remote console to mount images, drivers, or files to a virtual folder. If
a storage driver is required to install the OS, use the virtual folder to store the driver.
b. Press F11 at boot screen to select the boot device.
c. After the OS installed, update the drivers.
Register the Register the serverserver
9. To experience quick service and efficient support, register the server at the HPE website:
https://myenterpriselicense.hpe.comhttps://myenterpriselicense.hpe.com
To Next Page
Loading...
