The foiiowing iilusirate
ihe
use
of
HELP:
lomap
1-NORMAL
Test
->H
ROM
Versions:1.nnnn
2.nnnn
3.nnnn
4.nnnn
Self
test
Menu:
AL(l] [
count]
CH[an} [
count
[
,chan
] ]
CP[u] [
count]
E[xit]
I[omap} [
count
J
M[emoryJ [
count
PON
[
count
1
1-NORMAL
Test
->
Command Descriptions
The
IOMAP
command executes a version of IOMAP which
is
contained
in
the
Self Test ROM. This version
of
IOMAP displays
the
number
of
banks of memory physically installed
in
the system and identifies all of
the
I/O
cards installed in the system. For PIC cards, all supported HPIB devices attached to the PIC are
identified and
their
ID code
is
displayed along
with
a device description.
This command runs the memory size portion of the memory test and .lisplays the size of memory,
lists
the
LOAD and START/DUMP devices, and then displays the types of cards installed in the system. The types
of
devices on the PICs are also displayed.
The test may be looped by specifying the desired
number
of loops in
count.
Count must be
an
integer
between I and 9999
with
I being the default. A space
is
required before specifing
count.
The correct syntax for this command
is:
I [omap) [
count}
NOV
84
3-\3
To Next Page
Loading...
