HP Series 37 - Execution Control and I;O Operations

Softpanel
[+ }
MS [-expr }[: [l~~expr}}
[ [expr]}
[+ ]
MZ [-expr ][:[~~~expr}}
[ [expr]]
[+ ]
MPB[ -expr ] [: [{ ~ lexpr}]
[ [expr]]
[+ ]
MP [-expr ]{: {l ~ )expr]]
[ [expr]]
[+ ]
MPL( -expr ][: {I~ Jexpr]]
[ (expr]]
Register Operations
Modify the absolute address in the S register.
Modify
the absolute address in the Z register.
Modify
the absolute address in the MPB register.
Modify
the absolute address in the P register.
Modify
the absolute address in the PL register.
The DR command will display the common registers (i.e., P, PB, PL, CIR, DB, Q, S, etc.). If no field is
specified to DR then all common registers will be displayed.
The options are:
[reg )
BR [regfile[.countJ)
{
reg }
MR regfile
Execution Control
The options are:
E Exit back to Maintenance Mode
RUN Run (return to software)
NOV 84
4-4