HP Series 37 - Move Data Test; Test Section 6

Test Descriptions
3.6 TEST SECTION 6
Move Data Test
Step 61. Move Data Test -- This step uses the lower 32K-bytes of memory as a data bank and copies it
to every other 32K-byte block. The error latch is checked after each 32K-byte move
operation. This step
uses the Move Absolute Iustruction for speed and simplicity. This step is
repeated, using the 32K -bytes of each block as the data to write back into that block.
Error message:
Single-bit error detected
Board: X
Syndrome Code:
%YYY
Chip Number: UZZZZ
Where: X = 0/1
YYY = octal syndrome
UZZZZ = Reference Designator of faulty RAM
SEP 84
3-9