HP Series 37 - Memory and Register Operations

[+ 1
DPB[-expr l[:[~~lexprll[,countl
[ [exprll
[+ 1
DS [-expr l[:[~~lexprll[,count]
[ [exprll
[+ 1
DZ [-expr l[:[~~Iexprll[,count]
[ [expr]]
[+ ]
DP [-expr ][ : [ [~ I expr 11 [, count]
[ [exprll
[+ ]
DPL[-expr l[:[[~Iexprll[,count]
[ [exprJ]
Modify Memory
Softpanel
Displays the absolute address relative to the
PB register.
Displays the absolute address relative to the
S register.
Displays the absolute address relative
to the Z register.
Displays the absolute address relative
to the P register.
Displays the absolute address relative
to the PL register.
Modify memory commands will display the
current address, current contents, and waits for the user to
input a new value. This value can be input using a numeric field using the current default radix or may
be forced using the radix forces ("%" or "$"). The command will terminate when the user inputs either"."
or "//" in reponse to the prompt.
The options are:
MA expr[:[t~lexprl]
MEA bank.expr[: [~~lexpr]]
[+ ]
MSY[-expr ][:[~~lexpr]]
[ [exprll
[+ ]
MDB[-expr l[:[~~lexpr]]
[ [exprll
[+ ]
MDL[-expr l[:[t~lexpr]]
[ [expr11
[+ 1
MQ [-expr ][:[f+]expr]]
[[exprll L -]
Modify the absolute address in bank O.
Modify the absolute address in the specified bank.
Modify the absolute address in
sysgiobai.
Modify the absolute address in the DB register.
Modify the absolute address in the DL register.
Modify the absolute address in the
Q register.
NOV 84
4-3