Operating Instructions
Table
2-1.
DIAGNOSTIC COMMANDS
COMMAND
NAME
LOOPOFF*
Do not Loop
LT
Lists Tests
PEMP Print
Error
Messages to
Printer
PEMC* Print
Error
Messages to Console
RUN
restart program from section 1
SEOPP*
Suppress End of Program Pause
SEPS
Suppress Error Pause
SNDP
Suppress Non
-error
Display
TEST
(n)
Specify Test(s) to be executed
*default configuration
DESCRIPTION
overrides
LOOPTST and LOOPERR
lists available tests
with
a brief
description
uses
printer
that
is
defined in DUS
I/O
table
allows you to
restart
the diagnostic
returns to
DUS
does not pause
after
error
suppresses informational messages
allows you to select tests with a
+,
delete tests with a -
NOTE: Refer to the following
section for test descriptions.
SEP
84
2-5
To Next Page
Loading...
