HP Series 37 - Page 67

Test Descriptions
Step 23. EDAC Test - Double-bit Errors -- This step will verify double-bit error detection and
correction.
Thirty random double-bit errors are generated and checked for proper handling.
The syndrome latch
is checked for proper error logging.
SEP 84
3-4
Error messages:
Multi-error was detected during double-bit error test.
Board: Y; Block: Y
Where: Y = 0/1
Syndrome code expected was not returned;
Board: Y; Block: Y
Expected: ~AAA; Received: %ZZZ
Where: Y = 0/1
AAA and ZZZ = octal syndrome codes
Syndrome latch was not cleared after status was reported;
Board: Y
Where: Y = 0/1