TROUBLESHOOTING SCENARIOS AND SOLUTIONS 125
Chapter 5
A device in the IEEE-1394 port is
not responsive.
Cables of new external device
are loose or power cables are
unplugged.
Be sure that all cables are properly and securely
connected.
The power switch on the
device is not turned on.
Turn off the workstation, turn on the external device, then
turn on the workstation to integrate the device with the
workstation system.
The IEEE-1394 port is not active. The port is not there because it
was not purchased with the
system.
You can buy an IEEE1394 PCI adapter card. Contact an
HP seller.
Table 5-11 Front Panel Component Problems (Continued)
Problem Cause Solution
To Next Page
Loading...
