HP Xw8200 - Workstation - 1 GB RAM

50 SYSTEM MANAGEMENT
NOTE ProtectTools, the Hood Sensor (Smart Cover Sensor), and the Hood Lock (Smart Cover Lock)
are available as options on select systems.
Use the following utilities to manage security settings on the HP workstation:
 Locally, using the Computer Setup Utilities.
 Remotely, using HP Client Manager Software or System Software Manager. This software enables
the secure, consistent deployment and control of security settings from a simple command-line utility.
The following table and sections refer to managing security features of the workstation locally through
the Computer Setup (F10) Utilities.
Table 3-3 Security Features Overview
Feature Purpose How It Is Established
Removable Media Boot Control Prevents booting from the removable media
drives.
From the Setup Utilities menu.
Serial, Parallel, USB, or Infrared
Interface Control
Prevents transfer of data through the
integrated serial, parallel, USB, or infrared
interface.
From the Setup Utilities menu.
Power-On Password Prevents use of the workstation until the
password is entered. This can apply to both
initial system startup and restarts.
From the Setup Utilities menu.
Setup Password Prevents reconfiguration of the workstation
(use of the Setup Utilities) until the password
is entered.
From the Setup Utilities menu.
Network Server Mode Provides unique security features for
workstations being used as servers.
From the Setup Utilities menu.
DriveLock Prevents unauthorized access to the data on
specific hard drives.
From the Setup Utilities menu.
Master Boot Record Security Might prevent unintentional or
malicious changes to the MBR of the current
bootable disk and provides a means of
recovering the “last known good” MBR.
From the Setup Utilities menu.
Ownership Tag Displays ownership information, as defined
by the system administrator, during system
startup (protected by setup password).
From the Setup Utilities menu.
Kensington Cable Lock
Provision
Prevents entire system theft only. Install a Kensington cable lock to
secure the workstation to a fixed
object.
Padlock Loop Prevents access panel from being removed.
This loop can also be used to secure the unit
to a fixed object.
Install a padlock.
Access Panel Key Lock
(Standard)
Prevents removal of the access panel and all
internal components including optical and
floppy drives
Lock the access panel.