HPE ProLiant BL460c Gen10

11. Install the rubber stoppers in the new locations to secure the PEM nuts in the M.2 riser.
12.
Install the M.2 SSDs on the M.2 riser board.
13.
Install the M.2 riser board and the M.2 interposer board on the left DIMM bale (Installing the M.2 riser board and
M.2 interposer board).
14. Install the left DIMM
bale (Replacing the DIMM bales).
15. Install the access panel (Replacing the access panel).
16.
Install the server blade.
17. Power up the server blade.
Removal and replacement procedures
38