HPE ProLiant DL345 Gen11 - Results; Expansion card replacement

2. Disconnect the network cable from the transceiver.
3. Slide the transceiver out of the network adapter port.
See the transceiver documentation for model-specific release mechanism for removing the transceiver.
ResultsResults
To replace the component, reverse the removal procedure.
Expansion card replacementExpansion card replacement
SubtopicsSubtopics
Removing and replacing an expansion card from PCIe5 x16 base riserRemoving and replacing an expansion card from PCIe5 x16 base riser
Removing and replacing an expansion card from PCIe5 x16 low-profile riserRemoving and replacing an expansion card from PCIe5 x16 low-profile riser
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 123