ItemItem DescriptionDescription
1 Processor socket
2 Pin field cover cap
3 Processor carrier
4 Rail frame lift tabs
5 Retention frame screw (T-20)
6 Retention frame
7 Rail frame
8 Processor
Riser board componentsRiser board components
This server support two general types of PCIe risers:
Standard riser—This riser is a board-only riser that is directly installed on the riser connector on the system board. This riser type is
used:
As a standalone riser in a single-slot riser cage.
As the base riser in a three-slot riser cage.
Cabled riser—This riser type has its signal cable soldered on the board itself. This riser type is combined with a standard, base riser and
another cabled riser in a three-slot riser cage.
For clarity, the riser cage and the cables of the cabled risers are not shown in the following images.
Standard riser componentsStandard riser components
ItemItem DescriptionDescription
1 Storage controller backup power connector
2 PCIe5 x16 (16, 8, 4, 1) slot
Cabled riser componentsCabled riser components
To Next Page
Loading...
