HPE ProLiant DL345 Gen11 - Results; Removing and replacing the front 2 SFF stacked drive backplane; Prerequisites; About this task

14. Remove the 2 SFF side-by-side drive backplane:
a. Lift the backplane latch (callout 1).
b. Remove the backplane from the drive cage (callout 2).
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing the front 2 SFF stacked drive backplaneRemoving and replacing the front 2 SFF stacked drive backplane
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this taskAbout this task
HPE ProLiant DL345 Gen11 Server Service and Maintenance Guide 165